ORBIT Pipe Repair Clamps – assembled in Australia

MODEL: ORBIT REPAIR CLAMP

Available in any custom size or standard size between: 44.0mm and 440.0mm.

Orbit pipe repair clamps for pipeline leaks are widely used across Australia and parts of Asia because of the ease of installation and low cost. The Orbit pipe repair clamp model is the economical clamp allowing the user to seal any unwanted leak of gas or fluid from any holes or cracks in pipelines.  To Install – Wrap the clamp over the specific hole or crack ensuring the centre of the clamp covers the hole or crack, and then to fully seal the leak, tighten the bolts to the maximum bolt tightness indicated on the clamp label. The rubber on the clamp will seal the leakage by compressing down onto the pipe, and using the square rubber sections of the rubber for multiple sealing points. Sizes up to 250mm are rated to 16 Bar. Clamp sizes over 250mm in diameter have a pressure rating of 10 Bar. This model of clamp is only to be used to repair a leak and cannot be used to connect two pipes together. The Orbit pipe repair clamp can be fitted to any pipe material.
Available in outside diameter sizes from 44.0mm to 440.0mm.

Available in widths of 55mm, 78mm, 110mm, 200mm, 300mm, 400mm.

Sleeve material options are EPDM, NBR, Viton, only suited for temperatures up to 60 Degrees Celsius because of the rubber glue.

The casing and lock parts are manufactured from 316 stainless steel (W5) and also fitted with teflon coated stainless steel bolts.