September 2021 - ORBIT COUPLINGS

ORBIT Pipe Repair Clamps – assembled in Australia

MODEL: ORBIT REPAIR CLAMP

Available in any custom size or standard size between: 44.0mm and 440.0mm.

Orbit pipe repair clamps for pipeline leaks are widely used across Australia and parts of Asia because of the ease of installation and low cost. The Orbit pipe repair clamp model is the economical clamp allowing the user to seal any unwanted leak of gas or fluid from any holes or cracks in pipelines. To Install – Wrap the clamp over the specific hole or crack ensuring the centre of the clamp covers the hole or crack, and then to fully seal the leak, tighten the bolts to the maximum bolt tightness indicated on the clamp label. The rubber on the clamp will seal the leakage by compressing down onto the pipe, and using the square rubber sections of the rubber for multiple sealing points. Sizes up to 250mm are rated to 16 Bar. Clamp sizes over 250mm in diameter have a pressure rating of 10 Bar. This model of clamp is only to be used to repair a leak and cannot be used to connect two pipes together. The Orbit pipe repair clamp can be fitted to any pipe material.
Available in outside diameter sizes from 44.0mm to 440.0mm.

Available in widths of 55mm, 78mm, 110mm, 200mm, 300mm, 400mm.

Sleeve material options are EPDM, NBR, Viton, only suited for temperatures up to 60 Degrees Celsius because of the rubber glue.

The casing and lock parts are manufactured from 316 stainless steel (W5) and also fitted with teflon coated stainless steel bolts.

ORBIT Pipe Couplings and Clamps – Assembled in Australia

Model: FLEX GRIP 2

Available in a range of custom sizes or standard sizes between 20.0mm and 4000.0mm.

The Orbit Flex Grip 2 is the most versatile pipe coupling and pipe repair clamp model in the range due to its double locking mechanism on both sides of the coupling providing added strength and functionality. The Flex Grip 2 can be used for both pipe connection and joining as well as pipe repair.
1. Available in S or L, short or long versions – 2 piece pipe clamp
2. Non-axially restrained pipe coupling, and can be used for pipe repair.
3. Allows slight misaligned pipe connection
4. Allows vibration in the pipeline and slight movement
5. Good for connecting Metal, PE, FRP, GRP, PVC pipe
6. 316 Stainless Steel casing (W5) with EPDM, NBR, VITON or Silicone seal.

Coupling Size	OD	Pipe OD Range	Short length	Long Length	Pipe Gap (R) Short	Pipe Gap (R) Long	Maximum Bolt Tightness	Pressure	Estimated weight
mm	mm	mm	mm	mm	mm	mm	Nm	Bar	Kg
15	21.3	21-22	57		15		5	32	.3
20	26.8	25-28	57		15		5	32	0.3
25	33.4	32-35	57	100	15	30	5	32	0.7
32	42.2	40 – 44	57	100	15	30	10	32	0.8
40	48.3	46 – 50	57	100	15	30	10	32	.85
50	60.3	58-62	80	139	20	45	15	32	1.8
65	73.0	71-75	80	139	20	45	15	32	1.9
80	88.9	86-90	107	203	25	60	30	28	3.9
100	114.3	112 – 116	107	203	25	60	30	28	4.3
125	141.3	139 – 143	116	203	30	60	50	28	6.5
150	168.3	166 – 170	116	203	30	60	50	24	7.1
200	219.1	217 – 221	155	255	30	60	80	16	9
250	273.0	271 – 275	155	255	30	60	80	16	10
300	323.9	321 – 325	155	255	30	60	120	14	11
350	355.6	353 – 357	155	255	30	60	120	14	12
400	406.4	404-408	155	255	30	60	120	14	13
450	457.2	455-459	155	255	30	60	120	12	14
500	508.0	506-510	155	255	30	60	120	10	15

Orbit Couplings can manufacture custom made sizes of couplings up to 4000.0mm. The above table is for example purposes only.

ORBIT Flex Grip Open

Flex Grip Open L pipe coupling and clamp

Model: Flex Grip – Open

Available in a range of custom sizes or standard sizes between 20.0mm and 355.6mm.

The Orbit Flex Grip Open model of pipe coupling allows the user to connect two pipes together when the pipes are already in position as the open model can be wrapped around the pipe ends via the hinge mechanism. This open coupling can also be used to seal the unwanted leakage of gas or fluid caused by a hole or crack in a pipe simply and quickly by wrapping the clamp directly over the hole or crack in the pipe and tightening the bolts to ensure the seal sleeve stops the leakage. Useful for repairing leaks, small holes or cracks in pipes.
1. Available in S or L, short or long versions
2. Repair Burst Pipes Quickly and Cheaply
3. Opens with a hinge, for easy installation
4. 100% Tight seal for temporary repair
5. Good for repairing Metal, PE, FRP, GRP, PVC pipe
6. 316 Stainless Steel Casing (W5) with EPDM, NBR, Viton, Silicone seal.

Coupling Size	OD	Pipe OD Range	Short length	Long Length	Pipe Gap (R) Short	Pipe Gap (R) Long	Maximum Bolt Tightness	Pressure	Estimated weight
mm	mm	mm	mm	mm	mm	mm	Nm	Bar	Kg
15	21.3	21-22	57	72	15	22	5	32	.35
20	26.7	25-29	57	72	15	22	5	32	0.4
25	33.4	30-34	57	100	15	30	5	32	0.5
32	42.2	38 – 44	57	100	15	30	6	32	0.6
40	48.3	46 – 50	57	100	15	30	6	32	.65
50	60.3	58-62	80	139	20	45	10	32	1.4
65	73.0	71-75	80	139	20	45	10	32	1.5
80	88.9	86-90	107	203	25	60	25	28	3
100	114.3	112 – 116	107	203	25	60	25	28	3.3
125	141.3	139 – 143	116	203	30	60	35	28	3.3
150	168.3	166 – 170	116	203	30	60	35	24	5.1
200	219.1	217 – 221	155	255	30	60	50	16	6
250	273.0	271 – 275	155	255	30	60	50	16	7
300	323.9	321 – 325	155	255	30	60	80	14	8
350	355.6	353 – 357	155	255	30	60	80	14	9

Orbit Couplings can manufacture custom made sizes of couplings up to 4000.0mm. The above table is for example purposes only.

ORBIT Metal Lock

Model: METAL LOCK

Available in a range of custom sizes or standard sizes between 20.0mm and 406.4mm.

The Orbit Metal Lock pipe coupling allows the user to join and connect two metal pipes with axial restraint and pull out resistance. Ideally used when vibration in the pipeline is not allowable and where movement in the pipeline needs to be prevented as much as possible. This coupling also comes with the capability when coupled with the Fire protection cover to be fire proof.
1. Available in S or L, short or long versions
2. Axially restrained pipe coupling for 100% grip around the pipes
3. Prevents pipe connections from being pushed or pulled with grip rings and teeth locking the pipes in place together with the tightening of the bolt mechanism and solid bars.
4. Good for connecting Metal pipe
5. 316 Stainless Steel casing (W5) with EPDM, NBR, VITON or Silicone seal.







Coupling Size
OD
Pipe OD Range
Short length
Long Length
Pipe Gap (R) Short
Pipe Gap (R) Long
Maximum Bolt Tightness
Pressure
Estimated weight




mm
mm
mm
mm
mm
mm
mm
Nm
Bar
Kg


15
21.3
21-22
57
72
15
22
5
32
.35


20
26.7
25-28
57
72
15
22
5
32
0.4


25
33.4
32-35
57
100
15
30
6
32
0.45


32
42.2
38 - 44
57
100
15
30
12
32
0.5


40
48.3
46 - 50
57
100
15
30
12
32
.55


50
60.3
58-62
80
139
20
45
18
32
1.2


65
73.0
71-75
80
139
20
45
18
32
1.3


80
88.9
86-90
107
203
25
60
50
28
2.7


100
114.3
112 - 116
107
203
25
60
50
28
3.4


125
141.3
139 - 143
116
203
30
60
80
28
4.8


150
168.3
166 - 170
116
203
30
60
80
24
5.8


200
219.1
217 - 221
155
255
30
60
80
16
6.5


250
273.0
271 - 275
155
255
30
60
100
16
7


300
323.9
321 - 325
155
255
30
60
100
14
8


350
355.6
353 - 357
155
255
30
60
100
14
8.5


400
406.4
404-408
155
255
30
60
100
14
9


450
457.2
455-459
155
255
30
60
120
12
10


500
508.0
506-510
155
255
30
60
120
10
11

Orbit Couplings can manufacture custom made sizes of couplings up to 4000.0mm. The above table is for example purposes only.

ORBIT Plast Coupling

MODEL: PLAST COUPLING

The Orbit Plast Coupling with the copper rings on each side of the coupling allows the user to connect and join two plastic pipes together with axial restraint and pull out resistance for HPDE, PVC and other plastic pipe materials on the market. Most commonly used to connect but not limited to HDPE pipe.

Casing material is 316 stainless steel (W5) with sleeve options EPDM, NBR, Viton, Silicone.

Available in Sizes 20mm to 315mm. Pressure rating from 32 Bar.