ORBIT Pipe Repair Clamps – assembled in Australia

MODEL: ORBIT REPAIR CLAMP

Available in any custom size or standard size between: 44.0mm and 440.0mm.

Orbit pipe repair clamps for pipeline leaks are widely used across Australia and parts of Asia because of the ease of installation and low cost. The Orbit pipe repair clamp model is the economical clamp allowing the user to seal any unwanted leak of gas or fluid from any holes or cracks in pipelines. To Install – Wrap the clamp over the specific hole or crack ensuring the centre of the clamp covers the hole or crack, and then to fully seal the leak, tighten the bolts to the maximum bolt tightness indicated on the clamp label. The rubber on the clamp will seal the leakage by compressing down onto the pipe, and using the square rubber sections of the rubber for multiple sealing points. Sizes up to 250mm are rated to 16 Bar. Clamp sizes over 250mm in diameter have a pressure rating of 10 Bar. This model of clamp is only to be used to repair a leak and cannot be used to connect two pipes together. The Orbit pipe repair clamp can be fitted to any pipe material.
Available in outside diameter sizes from 44.0mm to 440.0mm.

Available in widths of 55mm, 78mm, 110mm, 200mm, 300mm, 400mm.

Sleeve material options are EPDM, NBR, Viton, only suited for temperatures up to 60 Degrees Celsius because of the rubber glue.

The casing and lock parts are manufactured from 316 stainless steel (W5) and also fitted with teflon coated stainless steel bolts.

ORBIT Pipe Couplings and Clamps – Assembled in Australia

Model: FLEX GRIP 2

Available in a range of custom sizes or standard sizes between 20.0mm and 4000.0mm.

The Orbit Flex Grip 2 is the most versatile pipe coupling and pipe repair clamp model in the range due to its double locking mechanism on both sides of the coupling providing added strength and functionality. The Flex Grip 2 can be used for both pipe connection and joining as well as pipe repair.
1. Available in S or L, short or long versions – 2 piece pipe clamp
2. Non-axially restrained pipe coupling, and can be used for pipe repair.
3. Allows slight misaligned pipe connection
4. Allows vibration in the pipeline and slight movement
5. Good for connecting Metal, PE, FRP, GRP, PVC pipe
6. 316 Stainless Steel casing (W5) with EPDM, NBR, VITON or Silicone seal.

Coupling Size	OD	Pipe OD Range	Short length	Long Length	Pipe Gap (R) Short	Pipe Gap (R) Long	Maximum Bolt Tightness	Pressure	Estimated weight
mm	mm	mm	mm	mm	mm	mm	Nm	Bar	Kg
15	21.3	21-22	57		15		5	32	.3
20	26.8	25-28	57		15		5	32	0.3
25	33.4	32-35	57	100	15	30	5	32	0.7
32	42.2	40 – 44	57	100	15	30	10	32	0.8
40	48.3	46 – 50	57	100	15	30	10	32	.85
50	60.3	58-62	80	139	20	45	15	32	1.8
65	73.0	71-75	80	139	20	45	15	32	1.9
80	88.9	86-90	107	203	25	60	30	28	3.9
100	114.3	112 – 116	107	203	25	60	30	28	4.3
125	141.3	139 – 143	116	203	30	60	50	28	6.5
150	168.3	166 – 170	116	203	30	60	50	24	7.1
200	219.1	217 – 221	155	255	30	60	80	16	9
250	273.0	271 – 275	155	255	30	60	80	16	10
300	323.9	321 – 325	155	255	30	60	120	14	11
350	355.6	353 – 357	155	255	30	60	120	14	12
400	406.4	404-408	155	255	30	60	120	14	13
450	457.2	455-459	155	255	30	60	120	12	14
500	508.0	506-510	155	255	30	60	120	10	15

Orbit Couplings can manufacture custom made sizes of couplings up to 4000.0mm. The above table is for example purposes only.

ORBIT Flex Grip Open

Flex Grip Open L pipe coupling and clamp

Model: Flex Grip – Open

Available in a range of custom sizes or standard sizes between 20.0mm and 355.6mm.

The Orbit Flex Grip Open model of pipe coupling allows the user to connect two pipes together when the pipes are already in position as the open model can be wrapped around the pipe ends via the hinge mechanism. This open coupling can also be used to seal the unwanted leakage of gas or fluid caused by a hole or crack in a pipe simply and quickly by wrapping the clamp directly over the hole or crack in the pipe and tightening the bolts to ensure the seal sleeve stops the leakage. Useful for repairing leaks, small holes or cracks in pipes.
1. Available in S or L, short or long versions
2. Repair Burst Pipes Quickly and Cheaply
3. Opens with a hinge, for easy installation
4. 100% Tight seal for temporary repair
5. Good for repairing Metal, PE, FRP, GRP, PVC pipe
6. 316 Stainless Steel Casing (W5) with EPDM, NBR, Viton, Silicone seal.

Coupling Size	OD	Pipe OD Range	Short length	Long Length	Pipe Gap (R) Short	Pipe Gap (R) Long	Maximum Bolt Tightness	Pressure	Estimated weight
mm	mm	mm	mm	mm	mm	mm	Nm	Bar	Kg
15	21.3	21-22	57	72	15	22	5	32	.35
20	26.7	25-29	57	72	15	22	5	32	0.4
25	33.4	30-34	57	100	15	30	5	32	0.5
32	42.2	38 – 44	57	100	15	30	6	32	0.6
40	48.3	46 – 50	57	100	15	30	6	32	.65
50	60.3	58-62	80	139	20	45	10	32	1.4
65	73.0	71-75	80	139	20	45	10	32	1.5
80	88.9	86-90	107	203	25	60	25	28	3
100	114.3	112 – 116	107	203	25	60	25	28	3.3
125	141.3	139 – 143	116	203	30	60	35	28	3.3
150	168.3	166 – 170	116	203	30	60	35	24	5.1
200	219.1	217 – 221	155	255	30	60	50	16	6
250	273.0	271 – 275	155	255	30	60	50	16	7
300	323.9	321 – 325	155	255	30	60	80	14	8
350	355.6	353 – 357	155	255	30	60	80	14	9

Orbit Couplings can manufacture custom made sizes of couplings up to 4000.0mm. The above table is for example purposes only.

ORBIT Elbow Repair Clamp

Model: Elbow Repair Clamp

Available in any custom size or standard size between: 15.8mm and 508.0mm.

The Orbit Elbow Repair Clamp enable pipe fitters and installers to seal the leakage of gas or fluid from a pipe bend crack or hole. Pipe elbows due to their curvature and re-direction of flow are susceptible to developing cracks on welds and wear from abrasive material inside the pipe. Normal repair clamps are too wide for the elbow curvature and the slim design of the elbow repair clamp allow for this fitting on a long radius pipe elbow. Available in sizes from 15mm to 508mm.

Casing manufactured from 316ss (W5).

Sleeve materials can be EPDM, NBR, Viton, Silicone

For long radius pipe elbows only.

Stainless Steel Pipe Couplings and Clamps assembled in Australia

ORBIT COUPLINGS – Stainless Steel Pipe Clamps

Our pipe couplings and pipe repair clamps are highly resistant to corrosion with high strength and high quality for reliability as they are manufactured from marine grade 316 stainless steel (W5).
Fully tested and certified to ISO 9001, CE, SGS standards and more.
Low maintenance is required after installation, if any.
No pipe preparation is required before installation on new pipes.
The coupling or clamp can be installed in minutes, by any installer. Quick and easy with no special tool requirements.
The pipe couplings provide a permanent pipe joining for the majority of pipes.
The couplings and clamps are delivered fully assembled with no loose parts to complicate installations.
The pipe couplings and clamps are tolerant of pipe imperfections, slight axial movements and vibrations of piping.
Available in custom made coupling sizes from 20.0mm to 4000.0mm.
Pressure ratings from 67 Bar.